This film shows how to getting started with your chainsaw. Remeber chainsaw oil and to choose the right oil and gas.
Before using your chainsaw please follow these important instructions the chain must always be lubricated when running or it will become overheated and can cause damage to the bar.
It's important that you use chainsaw oil the chainsaw is equipped with an automatic Oiler we recommend that you use a biologically degradable lubricant oil.
Pour the chain lubricant into the Chain lubricant tank. This is located close to the bar. Mix the petrol with a good quality fuel mixture two-stroke oil into a 2% mixture which is 100 ml of oil to every 5 L of petrol.
We strongly recommend that you use our customized green fuel mixture which is ready mixed. When working in remote locations the use of a combination refill can is both convenient and handy. Just fill the chain oil in the small container and fill the larger one with green fuel mixture. Our fuel can has an automatic shut off nozzle which prevents drips or spillage during refueling. Fuel can only be poured into the tank as long as you are applying pressure on the flexible nozzle. Fill the chain oil in the tank closest to the bar and the engine fuel mixture in the rear tank.
Always check the tension of the chain when refueling your chainsaw.
If it is too slack there is a risk that it can come loose and disengage.
McCulloch - The power to get it done.